Driver fatigue warning
●
With the vehicle speed meeting the
system activation condition, driver
fatigue warning enabled and the
camera unobstructed, when the
system detects signs of fatigue, such
as closing eyes, blinking and yawning,
it alerts the driver promptly through
a visual warning on the instrument
cluster, or through intelligent voice or
an audible alarm.
Driver distraction warning
●
With the vehicle speed meeting the
system activation condition, driver
distraction warning enabled and
the camera unobstructed, when the
system detects signs of distraction,
such as looking at the left side
mirror, the phone or the infotainment
touchscreen, it alerts the driver
promptly through a visual warning
on the instrument cluster, or through
intelligent voice or an audible alarm.
REMINDER
●
It is recommended to wipe the
camera lens with a clean and soft
cotton cloth to avoid scratches on
the lens.
Precautions
●
The driver monitoring system is
only an auxiliary system and is
not capable of eective recognition
and alarm-raising in all situations. It
cannot completely replace the driver's
subjective observation and judgment.
The driver must maintain control of the
vehicle at all times, complying with all
road laws and regulations, and taking
full responsibility for the vehicle.
●
The proper functioning and accuracy
of the driver monitoring assistance can
be aected by a number of situations,
including but not limited to:
●
Driver monitoring assistance is
disabled.
●
The camera is obstructed or the slide
cover is not fully open.
●
The camera is directly exposed to
strong light.
●
Part of the driver's face is exposed to
light or the complete facial features
are hard to recognize.
●
The driver wears infrared-blocking
glasses.
●
The driver wears a mask or
something that covers the mouth.
●
The driver is not properly seated or
the driver's face is in the blind spot of
the camera.
WARNING
●
The driver should pull over the
vehicle as soon as possible when
feeling tired.
Child Presence Detection
(CPD)
After the vehicle is powered o, child
presence detection is performed if any
door is opened and then all doors are
closed or locked. If child presence is
detected, an alarm is given in the form
of light ashing and honking. The A/C will
be switched on soon after. To cancel the
alarm, unlock or open any door.
How to Use
Access this function in
→ Vehicle
→ Cabin Perception. Three options are
provided: Standard, Delay, and O.
●
By default, the system is in standard
mode (switched on) each time when
the vehicle is powered on.
147
04
USING AND DRIVING
To Next Page
Loading...
