BYD TANG 2024 - Page 98

REMINDER
●
Do not open the charge port door
forcibly when it is locked.
●
Connect the power supply terminal:
●
Plug the Mode 2 charging cable into a
household socket.
●
Connect the vehicle port:
●
Plug the charging connector correctly
into the port.
●
After the charging connector is
inserted, the charging connection
indicator
on the instrument
cluster or infotainment screen lights
up.
REMINDER
●
Do not try to forcibly plug the
connector with the anti-theft lock
engaged.
●
In the charging process, the instrument
cluster displays relevant charging
parameters and the charging sign.
●
At this point, you can schedule
charging on the infotainment
touchscreen. See "Scheduled
Charging" for the con󽗉guration
process.
REMINDER
●
During charging, the estimated
remaining time to full charge
is displayed on the instrument
cluster or infotainment system. It
is normal that the remaining time
to full charge may vary slightly
depending on the temperatures,
SOC, and charging facilities.
●
Reservation charging cannot be
used when the remaining battery
is too low.
3. Stopping charging
●
End the charging:
●
The charging automatically ends
when the vehicle is fully charged.
●
To end the charging early, proceed to
the next step.
●
Disconnect the charge port:
●
If the anti-theft mode of the electrical
lock is deactivated, directly pull out
the charging connector.
●
If the anti-theft lock is active, press
the unlock button on the key or press
the door handle microswitch (when
the key is nearby), then pull out the
charging connector.
REMINDER
●
To unlock the vehicle, press
the unlock button on the key
(when charging the vehicle with
ignition switched o󽗈) or press the
microswitch on the door handle
(when the key is nearby).
●
Unlock the vehicle to deactivate
the anti-theft lock before pulling
out the charging connector. The
connector has to be pulled out
97
04
USING AND DRIVING