EasyManua.ls Logo

BYD TANG 2024 - Page 99

BYD TANG 2024
230 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REMINDER
within 30 seconds, or the port will
re-lock.
You can activate the anti-
theft lock on the infotainment
touchscreen, as detailed in
"Charge Port Anti-theft Lock" in
this chapter.
If the charging connector cannot
be removed after unlocking,
try a few more unlocking
attempts. If that does not work,
try emergency unlocking. For
the operating procedure, see
"Emergency Unlocking of the
Charge Port" in "Charge Port Anti-
theft Lock".
When the charge port's anti-theft
mode is deactivated, if you cannot
pull the charging connector out
directly, try to unlock the vehicle
and pull it again.
Disconnect the power plug.
Close the charge port cap and the port
door.
Store the charging equipment
properly.
REMINDER
When the port cap is fully open,
do not close the charge port door.
WARNING
Never drop the Mode 2 charging
cable or pull it directly by
its cable. Take caution when
moving the equipment. Store the
equipment in a cool place after
use.
Using AC Charging Piles
1. Equipment
Charge the vehicle using an AC
charging pile in a public place.
Charging time: Refer to the charging
time message on the instrument
cluster or infotainment touchscreen.
Use a standard-compliant household
charging box. For how to use the
charging equipment, refer to its user
manual and follow the operating steps.
AC charging box: consists of a charging
box, a charging connector, and a
connecting cable. For information on
circuit breaker and emergency stop
switch, see the charging box user
manual.
AC connection device: Mode 3
charging cable includes a power plug
(complying with local standards), a
charging connector, a control box,
and a charging cable. The plug is
connected to the power outlet, and
the charging connector to the vehicle's
charge port.
2. Charging
Unlock the vehicle and open the
charge port door:
Close the charge port cap and the
port door (see instructions for Mode
2 charging).
Connect the power outlet:
Skip this step if an AC charging box is
used for charging.
Skip this step if an AC charging pile
equipped with a charging connector
is used.
Use Mode 3 charging cable to
connect your vehicle to the AC
charging pile if no charging
connector is provided.
98

Table of Contents

Related product manuals