BYD TANG 2024 - Page 100

●
Connect the vehicle port:
●
Plug the charging connector into the
port and make sure it is tight.
●
Charging settings:
●
For AC charging pile/box subject to
authentication, swipe the card or
scan the QR code. See the user
manual for charging pile/box for
details.
●
The charging connection indicator
lights up on the instrument cluster.
●
In the charging process, the instrument
cluster displays relevant charging
parameters and the charging sign.
●
At this point, you can schedule
charging on the infotainment
touchscreen. See "Scheduled
Charging" for the con󽗉guration
process.
3. Stopping charging
●
End the charging:
●
Charging ends automatically when
early stop time is due or charging is
complete.
●
Disconnect the charge port:
●
Disconnect as per the instructions for
Mode 2 Charging.
●
Disconnect the power plug:
●
If Mode 3 charging cable is used,
it is recommended to unplug the
charging connector from the vehicle
󽗉rst and then the plug from the
charging point.
●
Skip this step if an AC charging box is
used for charging.
●
Skip this step if an AC charging pile is
equipped with a charging connector.
●
Close the charge port cap and the
port door (see instructions for Mode 2
charging).
●
Store the equipment properly.
●
If using an AC charging pile/box,
place the charging connector in its
designated location in the charging
pile/box.
●
Store the equipment properly.
CAUTION
●
Never drop the Mode 3 charging
cable or pull it directly by
its cable. Take caution when
moving the equipment. Store the
equipment in a cool place after
use.
●
Do not try to forcibly plug the
connector with the anti-theft lock
engaged.
●
See the charging instructions for
speci󽗉c charging precautions.
Using DC Chargers
1. Equipment
●
Use the DC battery charger in public
places to charge the vehicle. Generally,
it is installed in a speci󽗉c charging
station.
●
Equipment speci󽗉cations: Please
check the instructions for the charger.
●
Charging time: Refer to the charging
time message on the instrument
cluster or infotainment system.
2. Charging
●
DC charging is achieved by connecting
the vehicle to a DC charger via its
connector.
●
Unlock the charge port door, then
open the port door and cap.
●
Connect the vehicle port:
●
Plug the charging connector into the
port and lock it.
99
04
USING AND DRIVING