C-4 cab Produkttechnik GmbH & Co KG
M4
Error
Protocol error
Solution
Depending on the type of error, the
command can be skipped by
pressing the key or the print
job must be canceled by pressing
the key.
Switch the printer off.
Correct the interface settings in
printer setup (see chapter 8).
Possible Cause
Printer has received an unknown or
invalid command (display shows
command abbreviated).
The interface of the computer and
printer are set differently.
Appendix C - Error Messages / Problem Solution
Table C-5 Error Messages (continuation)
To Next Page
Loading...
