CAB M4 - Page 38

38 cab Produkttechnik GmbH & Co KG
M4
System Mode PRINT
The printer is currently processing an active print job.
In this mode, the transfer of data is possible. New print jobs will be carried out
immediately following the completion of the previous job.
Key/ State Function
Lettering
on Interrupts the current print job
on Short press - cancels the current print job
Long press - cancels the current print job
and deletes all jobs contained in the
internal memory
System Mode PAUSE
The printing process is temporarily interrupted by the operator.
Key/ State Function
Lettering
on Continues the print job
on Short press - cancels the current print job
Long press - cancels the current print job
and deletes all jobs contained in the
internal memory
System Mode POWERSAVE
If the printer does not receive a print job or the navigator pad has not been
accessed for a period of time, the printer will switch into a powersave mode.
During powersave mode, certain functions are powered off. In this mode the
lettering of the key gets lighter or darker by turns.
To leave this mode press any key or send a print job.
6. Navigator Pad