60 cab Produkttechnik GmbH & Co KG
M48. Printer Configuration
- Click on the parameter you want to change. In the lower part of the window
the current setting is shown. Click on that area.
- Depending on the parameter type you can select the new setting from a list
or enter the new setting directly.
- When you have finishing all settings, leave the "M Series" tab by clicking on
"OK".
The new settings will be uploaded to the printer.
NOTICE !
To cancel all new settings leave the "M Series" tab by clicking on the
"Cancel" button.
Fig. 8f Changing the parameter "Country"
To Next Page
Loading...
