©2020 CAE 905K640152 v1.1 61
Using Ares
To replicate laryngospasm:
1. Attach the yellow tubing to the port on Ares' left side labeled LARYNGO.
2. Pull back syringe plunger and fill syringe with 50 ml of air.
3. Attach syringe to stopcock and inject air into manikin.
4. Turn stopcock off to manikin and remove syringe from stopcock.
5. To release laryngospasms, open stopcock to air.
Gastric Distention
During esophageal intubation or overly aggressive bag-valve-mask ventilation, gastric distention
occurs. Gastric distention is relieved by putting pressure on the abdomen.
Tracheostomy Tube Placement
The following instructions provide steps for adequate tracheostomy tube placement .
Learners can:
• Clean the tracheostomy site.
• Replace the tube.
Note: The tracheostomy site is closed with a plug.
To place a tracheostomy tube:
1. Remove the plug.
2. Prime the airway reservoir using silicone spray.
3. Place the tracheostomy tube into the tracheostomy site and secure it in place.
4. After the simulation, rRemove the tracheostomy tube and replace the plug.
To Next Page
Loading...
