EasyManua.ls Logo

CAE Ares - Product Use Warnings; Manikin; Fluids System

Default Icon
103 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cautions and Warnings
2 ©2020 CAE 905K640152 v1.1
CAEAres
Product Use Warnings
Manikin
Make sure the manikin is set up on a stable, sturdy work surface that will not collapse and
cause injury to users.
Operate the manikin in ambient temperatures below 104°F (40°C).
Note: This only applies when using the manikin without the tablet where CAEMaestro
software is installed. For information about temperature ranges for the tablet, see
Ambient Temperature Range.
Do not disassemble factory-assembled parts of the manikin without receiving instructions
from Customer Service.
Clean the manikin with water and a light soap solution only. Do not use chemical solvents.
Do not immerse the manikin in liquid or use abundant liquid to wash the manikin. For
more information, see the Care and Maintenance section.
Do not place foreign substances into the airway, with the exception of small amounts of
approved lubricant. Only perform invasive procedures supported by the Product as
described in the applicable sections of the User Guide.
Do not insert any materials into the manikin except the equipment or probes supplied.
If your manikin’s configuration supports limbs, do not lift the manikin by its limbs. Support
the head and lift it from the torso. If necessary, have another person help you lift and
move the manikin.
Fluids System
If your manikin is equipped with fluid systems:
Do not modify the reservoirs or any assembly component.
Always protect your eyes, skin, and clothing against accidental exposure.

Table of Contents

Related product manuals