Using Ares
76 ©2020 CAE 905K640152 v1.1
CAEAres
Non-Invasive Blood Pressure Measurement
Blood pressure can be taken manually on either arm. Non-invasive blood pressure (NIBP) monitoring
techniques can be used by attaching the standard cuff modified with a T-fitting and adapters.
For information on attaching the NIBP arm and modifying the blood pressure cuff, see the Setup
section in this user guide.
To get a blood pressure reading:
1. Connect the extension from the T-fitting on the blood pressure cuff adapter to the NIBP
port on Ares’ right side .
2. Ensure the electronics tether from the NIBP arm is connected to the arm connector on
Ares’ right side.
Ares’ Right Side
NIBP port
To Next Page
Loading...
