Cal Amp VIPER SC+ 100 series User Manual

Viper SC+™ IP Router for Licensed Spectrum PN 001-5008-000 Rev. C | Page 166
USER NAT ENTRIES
The user can add three (3 ) User IP addresses that will be considered private.
The following figure shows User1 IP address 192.168.205.125 and User 2 IP address 192.168.205.90 will be considered
private. If User 3, whose IP address is 192.168.205.87, is connected to the Viper, but not added to the table, User 3
192.168.205.87 would not be considered private.
Figure 90 – User 1 and User 2 (Private)

Cal Amp VIPER SC+ 100 series Specifications

General

Brand	Cal Amp
Model	VIPER SC+ 100 series
Category	Network Router
Language	English