Cal Amp VIPER SC+ 100 series User Manual

Viper SC+™ IP Router for Licensed Spectrum PN 001-5008-000 Rev. C | Page 75
4.4.4. BROADCAST MULTICAST
Broadcast Multicast is the fourth (from left) tab in the LAN Settings page. To navigate to this tab, select LAN Settings
from the main menu and click Broadcast Multicast. This tab allows you to set parameters for Broadcast and Multicast
from the Viper.
Figure 48 – LAN Settings – Broadcast Multicast
Broadcast
Directed Broadcast
This parameter controls the forwarding of directed broadcast packets from the LAN interface to the RF interface.
Directed Broadcast is enabled by default.
Limited Broadcast
This parameter controls the forwarding of limited broadcast packets from the LAN interface to the RF interface.
Limited Broadcast is disabled by default.

Cal Amp VIPER SC+ 100 series Specifications

General

Brand	Cal Amp
Model	VIPER SC+ 100 series
Category	Network Router
Language	English