Cambium cnPilot E400 - Product Description; Overview of cnPilot Enterprise AP; Key Features

cnPilot Enterprise AP User Guide CAMBIUM NETWORKS
14
Product Description
This chapter provides a high level description of the cnPilot Enterprise AP product. It describes the
function of the product and the main hardware components.
The major topics described in this document are:
• Overview of cnPilot Enterprise AP
• System configuration
• Radio configuration
• WLAN Configuration
• Network Configuration
• Guest Access
• Firewall and ACL
• Firmware Management
• Troubleshooting
Overview of cnPilot Enterprise AP
This section introduces the key features, typical use cases, product variants and components of the
cnPilot Enterprise AP.
PURPOSE
cnPilot Enterprise AP is an indoor 802.11ac dual band radio Wi-Fi Access point. It is a 2x2:2 (2
spatial streams) device and supports over 1Gbps of data rate. It has one Gigabit Ethernet port that
also provides Power over Ethernet.
KEY FEATURES
This section describes the key features of cnPilot Enterprise AP:
 Capacity of cnPilot E400:
o WLANs: 16
o Clients: 128 for 11ac radio and 256 for 11n radio
 Capacity of ePMP 1000 Hotspot:
o WLANs: 8
o Clients: 128
 Can be managed via Cambium Networks cnMaestro cloud-based network manager.
 Supports device configuration by using CLI or UI.
 Can be monitored via SNMP versions v2 and v3.
 A Client traffic can be controlled through rate-limiting policies, configured per-
WLAN or per-client.
 Supports Captive Portal redirection (Guest Access) with WISPr functionality
 Supports L3 services such as NAT, port forwarding, DHCP server, and DNS proxy