cnPilot Enterprise AP User Guide CAMBIUM NETWORKS
Onboarding to cnMaestro
Overview
cnMaestro is Cambium's next generation network management platform based on Cloud
technologies. It will eventually replace the entire lineup of Network Management Tools. The initial
release will include support for ePMP and cnPilot family of devices. Subsequent releases will add
the remaining devices in the Cambium portfolio. The legacy and 3rd party devices will be
supported by a proxy application.
In addition to the Cloud deployment, the solution will also be able to be deployed as a standalone,
redundant server solution for deployments where access to the Internet is restricted or forbidden.
Onboarding Steps
You can onboard cnPilot Enterprise AP to cnMaestro using the following steps:
1. To enable Cambium Remote Management:
(cnPIlot Enterprise AP) # management cambium-remote
2. If the device does not have a unique Serial Number (MSN), then set the cambium-
id/password obtained from Cambium Support:
3. If the device is claimed and is able to reach the cnMaestro, it will get on-boarded. The
cnMaestro connection status can be seen under “Cambium Remote Management Status”.
To view the connection status:
(cnPIlot
Enterprise AP)
# cambium-id <cambium-id> <password>
(cnPIlot Enterprise AP # management cambium-remote
url https://cloud.cambiumnetworks.com
(cnPIlot Enterprise AP) # apply
(cnPIlot Enterprise AP) # save
(cnPIlot Enterprise AP) # show management
Remote Management
Config : Enabled
URL : https://cloud.cambiumnetworks.com
Status: Not Connected
To Next Page
Loading...
