Cambium cnPilot E400 - RADIUS Server Configuration

cnPilot Enterprise AP User Guide CAMBIUM NETWORKS
32
To configure SSID:
(cnPilot Enterprise AP) (config-wlan-1)# ssid<name>
To configure security:
(cnPilot Enterprise AP) (config-wlan-1)# security wpa2-psk
(cnPilot Enterprise AP) (config-wlan-1)# passphrase <string>
To view the client status:
(cnPilot Enterprise AP) (config)#show wireless clients
To view the client statistics
(cnPilot Enterprise AP) (config)#show wireless clients statistics
To configure 802.11w:
(cnPilot Enterprise AP) (config)# protected-mgmt-frames sa-query-retry-time msecs
(cnPilot Enterprise AP) (config)# protected-mgmt-frames association-comeback secs
(cnPilot Enterprise AP) (config)# [no] protected-mgmt-frames state optional | mandatory
To configure Fast Roaming Protocol:
(cnPilot Enterprise AP) (config)# fast-roaming pre-authentication
(cnPilot Enterprise AP) (config)# fast-roaming okc
(cnPilot Enterprise AP) (config)# fast-roaming 802.11r
(cnPilot Enterprise AP) (config)# fast-roaming 802.11r over-the-ds
(cnPilot Enterprise AP) (config)# fast-roaming 802.11r reassociation-timeout x #Reassociation time out
in secs
Configuring RADIUS Servers
RADIUS accounting allows user activity and statistics to be reported from the device to RADIUS
servers.
This section provides details on configuring parameters for RADIUS Servers.
The following table lists the fields that are displayed in the Configure > WLAN > RADIUS Servers
page:
Table 9: Configure: RADIUS Servers parameters
Parameter
Description
Default Value
Authentication
Server
IP address of the host for the authentication server.
─
Timeout
Timeout in seconds of each request attempt.
─
Attempts
Number of attempts before a request is given up.
─
Accounting
Server
IP address of the host for the accounting server.
─
Timeout
Timeout in seconds of each request attempt.
─