CAME 801QA-0050 - Fastening the Control Panel

To Next Page

To Previous Page

Page 10 - Manual FA01554-EN - 01/2021 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions

Fastening the control panel

DIN rail

195

125

Standard

254

178

Main Page

Safety Instructions2
Dismantling and Disposal3
Product Data and Information5
Specifications5
Description of Parts6
Optional Accessories7
Size8
Cable Types and Minimum Thicknesses8
BUS Cable Table8
Installation9
Preparing the Control Panel9
Fastening the Control Panel10
Electrical Connections11
Preparing the Electrical Cables11
Power Supply12
Connecting to the Mains12
Power Supply Output for Accessories12
Connection to One or Two Electric Locks 12 V AC/DC - Max 15 W12
Maximum Capacity of Contacts13
Gearmotors13
Gearmotor with Encoder14
Gearmotors with Slowdown Switches16
Gearmotors Without Encoder17
Devices with BUS CXN System18
Cabling18
Cable Type18
Maximum Number of Devices that Can be Connected, by Type18
Command and Control Devices19
Antenna with RG58 Cable19
Signalling Devices20
Operator Status Warning Light20
Safety Devices21
Programming Button Functions23
Getting Started23
Diagrams Showing Leaf Speed, Slowdown and Approach Points24
Using Slowdown Space24
Virtual Encoder25
Functions Menu25
Total Stop25
CX Input26
CY Input26
Safety Devices Test27
Hold-To-Run27
Gate-Open Warning Light27
Encoder27
Thrust28
Electric Lock28
Additional Light28
Automatic Closure28
Removing Obstacles33
New User33
Remove User33
Remove All33
Motor Test34
Radio Decoding34
Self-Learning Rolling34
Travel Calibration34
Forgotten Password35
Saving and Uploading User and Configuration Data36
Photocell BUS36
Error Messages37
Final Operations37

CAME 801QA-0050 - Fastening the Control Panel

Table of Contents

Related product manuals