CAME ZR24N - Mounting the Control Panel; Fastening the Control Panel

75
180
❶❷❸
p. 9 - Manual FA00943-EN - 01/2018 - © CAME S.p.A. - Translation of the original instructions
Fastening the control panel
❶ Fasten the control panel's base so that it is protected, and use suitable wall-plugs and screws.
❷Drill the marked holes beneath the control panel's base.
⚠ Keep the control board undamaged, inside the control panel.
❸ Drill through the pre-perforated holes and fi t the cable gland with corrugated pipes for passing through the electric cables.