CAME ZR24N - Final Operations and Disposal; Fastening the Cover

p. 19 - Manual FA00943-EN - 01/2018 - © CAME S.p.A. - Translation of the original instructions
FINAL OPERATIONS
Fastening the cover
Once fi nished with the electrical connections and powering up, fi t the cover and secure it using
the supplied screws.
Deleting all users
Set DIP-switch 4 to ON.
Keep pressed for about 10 seconds the PROG button on the control board. The programming LED will perform a series of fl ashes
until shut down.
Reset DIP-switch 4 to OFF.