5”
max
p. 18 - Manual FA00943-EN - 01/2018 - © CAME S.p.A. - Translation of the original instructions
Deleting single users that have been previously saved.
Set DIP-switch 4 to ON.
Keep pressed the PROG button on the control board. The programming LED fl ashes.
Within fi ve seconds, press the button on the transmitter of the user you wish to delete. The LED will fl ash quickly for one second
to signal that the user has been deleted, and then it will switch o .
Reset DIP-switch 4 to OFF.
To Next Page
Loading...
