CAME ZR24N - Product Overview; Product Description; Intended Use

p. 5 - Manual FA00943-EN - 01/2018 - © CAME S.p.A. - Translation of the original instructions
KEY
This symbol shows which parts to read carefully.
⚠
This symbol shows which parts describe safety issues
☞
This symbol shows which parts to tell users about.
The measurements, unless otherwise stated, are in millimeters.
DESCRIPTION
Control panel with on-board radio decoding. Set functions by using DIP-switches and adjust them by using the trimmers.
All connections are protected by fuses.
Intended use
The ZR24N control panel is designed for controlling gearmotors for CAME, H-series, winding motors for shutters in homes and
businesses.
 Any installation and/or use other than that specifi ed in this manual is forbidden.