l IP address
l IP default gateway
l Subnet mask
l PPP interface
l PPP dial string
l PPP dial response
l Baud rate change on control ports
l Maximum number of TLS server connections
l USR drive size
l PakBus encryption key
l PakBus/TCP server port
l HTTP service port
l FTP service port
l PakBus/TCP service port
l PakBus/TCP client connections
l Communications allocation
10.1 DataTableInfo table system information
The DataTableInfo table is automatically created when a program produces other data tables.
View the DataTableInfo table by connecting the data logger to your computer (see Making the
software connection (p. 43) for more information).
Most fields in the DataTableInfo table are read only and of a numeric data type unless noted.
Error counters (for example SkippedRecord) may be reset to 0 for troubleshooting purposes.
l LoggerNet users, select DataTableInfo from the Table Monitor list.
l RTDAQ users, click the Monitor Data tab and add the DataTableInfo to display it.
l PC200W and PC400 users, click the Monitor Data tab and add the DataTableInfo to display
it.
10.1.1 DataFillDays
Reports the time required to fill a data table. Each table has its own entry in a two-dimensional
array. First dimension is for on-board memory. Second dimension is for card memory.
10.1.2 DataRecordSize
Reports the number of records allocated to a data table.
10.1.3 DataTableName
Reports the names of data tables. Array elements are in the order the data tables are declared in
the CRBasic program.
l String data type
10.1.4 RecNum
Record number is incremented when any one of the DataTableInfo fields change, for example
SkippedRecord.
10. Information tables and settings (advanced) 164
To Next Page
Loading...
