l Frequency Zone 3: 905.7024 to 907.0848 MHz
l Frequency Zone 4: 907.3152 to 908.6976 MHz
l Frequency Zone 5: 908.9280 to 910.3104 MHz
l Frequency Zone 6: 910.5408 to 911.9232 MHz
l Frequency Zone 7: 912.1536 to 913.5360 MHz
l Frequency Zone 8: 913.7664 to 915.1488 MHz
l Frequency Zone 9: 915.3792 to 916.7616 MHz
l Frequency Zone 10: 916.9920 to 918.6048 MHz
l Frequency Zone 11: 918.8352 to 920.2176 MHz
l Frequency Zone 12: 920.4480 to 921.8304 MHz
l Frequency Zone 13: 922.0608 to 923.4432 MHz
l Frequency Zone 14: 923.6736 to 925.0560 MHz
l Frequency Zone 15: 925.2864 to 926.6688 MHz
l Frequency Zone 16: 926.8992 to 927.8208 MHz
l Long data type
Where to find:
l Settings Editor tab in Device Configuration Utility: RF451 > Frequency Zone (1-16)
10.4.74.9 RadioHopSize
Defines how many separate channels will be used by the network. Range is 50 to 112.
l Long data type
Where to find:
l Settings Editor tab in Device Configuration Utility: RF451 > Hop Table Size
10.4.74.10 RadioHopVersion
This setting allows the user to choose the portion of the band in which the transceiver will
operate.
l 0 = Standard, Full 902-928 MHz
l 1 = Australia, 915-928 MHz
l 2 = Table 2, 903.744-926.3232 MHz
l 3 = Table 3, 916-920 MHz
l 4 = New Zealand, 921-928 MHz
l 5 = Notch, Uses 902-928 MHz with center frequencies of 911-919 MHz notched out
l 6 = Brazil, 902-915 MHz
10. Information tables and settings (advanced) 196
To Next Page
Loading...
