10.2.28 OSDate
Release date of the operating system in the format mm/dd/yyyy. Updated at startup.
l String data type
10.2.29 OSSignature
Signature of the operating system.
10.2.30 OSVersion
Version of the operating system in the CR6. Updated at OS startup.
l String data type
10.2.31 PakBusRoutes
Lists routes or router neighbors known to the data logger at the time the setting was read. Each
route is represented by four components separated by commas and enclosed in parentheses:
(port, via neighbor address, pakbus address, response time in ms). Updates when routes are
added or deleted.
l String data type
10.2.32 PanelTemp
Current processor board temperature (°C). Updates once per minute, when viewing the Status
table, or programatically.
10.2.33 PortConfig
Provides information on the configuration settings (input, output, SDM, RS-485, SDI-12, COM
port) for Cor U terminals in numeric order of terminals. Default = Input. Updates when the port
configuration changes.
l String data type
10.2.34 PortStatus
States of C terminals configured for control. On/high (true) or off/low (false). Array elements in
numeric order of C terminals. Default = false. Updates when state changes. Enter -1 to set to true.
Enter 0 to set to false.
l Boolean data type
10. Information tables and settings (advanced) 169
To Next Page
Loading...
