Campbell CR6 - Collecting Data

4.2 Collecting data
The data logger writes to data tables based on intervals and conditions set in the CRBasic
program (see Creating data tables in a program (p. 56) for more information). After the program
has been running for enough time to generate data records, data may be collected by using data
logger support software. During data collection, data is copied to the computer and still remains
on the data logger. Collections may be done manually, or automatically through scheduled
collections set in LoggerNet Setup. Use these instruction or follow the Collect Data Tutorial .
4.2.1 Collecting data using LoggerNet
1.
From the LoggerNet toolbar, click Main and Connect , select the data logger from the
Stations list, then Connect .
2.
Click Collect Now .
3. After the data is collected, the Data Collection Results window displays the tables collected
and where they are stored on the computer.
4. Select a data file, then View File to view the data. See Viewing historic data (p. 50)
4.2.2 Collecting data using PC200W or PC400
1.
Click Connect on the main PC200W or PC400 window.
2. Go to the Collect Data tab.
4. Working with data 49