TE-BBR Instruction and Operation Manual
• Only qualified personnel should operate the TE-BBR.
• Make sure that you read and understand all operating instructions and safety precautions
listed in this manual before installing or operating your unit. If you have questions regarding
instrument operation or documentation, contact Cannon Instrument Company.
• Do not deviate from the installation, operation, or maintenance procedures described in this
manual. Improper use of the TE-BBR may result in a hazardous situation and may void the
manufacturer’s warranty.
• Handle and transport the unit with care. Sudden jolts or impacts may cause damage to
components.
• Always remove liquid from the bath before moving the unit.
• Observe all warning labels. Never remove warning labels.
• Never operate damaged or leaking equipment.
• Unless procedures specify otherwise, always turn off the unit and disconnect the mains cable
from the power source before performing service or maintenance procedures, or before
moving the unit.
• Refer all service and repairs to qualified personnel.
Warning: Hot surface cautions may be attached on or near hot surfaces
of the TE-BBR. Avoid touching hot surfaces, particularly when operating
the instrument at bath temperatures exceeding 50 °C.
~MAINS
The
symbol indicates the connections for the AC power supply. The AC
power input must match the electrical specifications of the instrument.
Never operate the equipment with a damaged MAINS AC power cable.
Use only the manufacturer-supplied MAINS AC power cable. This cable must be
inserted into a receptacle with a protective earth ground.
(O)
The
symbol indicates the OFF position for the electrical switches for your
unit.
To Next Page
Loading...