TE-BBR Instruction and Operation Manual
Replacement Parts
Table 7 is a list of TE-BBR replacement parts available from Cannon Instrument Company.
Table 7: TE-BBR Replacement Parts
Silicone Rubber Mold for BBR 9728-V40 Stirrer Motor Replacement Kit 44.0610
Tubing Polyflo Grn 02.1740 Front Back Alignment Beam 44.0615
Solenoid Valve 41.5 2 gram weight 44.0657
Rubber-Mold Frame 44.0009 Cover Assembly Bath 44.1080
Rubber-Mold Silicone Insert 44.0010 Pressure Gauge (0-100) 44.1520
Cover 6 ¼ x 6 ¼ Glass 44.0011 Pressure Gauge (0-15) 44.1530
Sheet 6” x 6” Square Silicone 44.0012 Pressure Regulator (high) 44.1540
Clip 3” (BBR Beam Mold) 44.0013 Pressure Regulator (precision) 44.1550
Laser Film 1 5/8” W x 6” L 44.0014 Solenoid Valve (240v) 44.1570
Power Switch (18A) 44.0546 Zero Regulator Assembly 44.1582
Spin Star 44.0574 Load Regulator Assembly 44.1583
Stirrer Protection Sheet 44.0589
Ribbon Cable 27" Yellow
Coded
44.2710
Ribbon Cable 27" Blue Coded 44.2730 Ribbon Cable 27" Grey Coded 44.2730
O-Ring Bottom Cylinder 44.4160 Lamp 5V 44.4520
Window Lamp (Lexan) 44.4550
Beam Mold Kit (makes 1
beam)
44.6200
Beam Mold Kit (makes 6
beams)
44.6205 Beam Mold Side Section 44.6210
Beam Mold Bottom Section 44.6220 Beam Mold End Section 44.6230
O-Ring Set OF 12 44.6235 O-Ring 7/8 OD X 11/16 ID 44.6240
To Next Page
Loading...