TE-BBR Instruction and Operation Manual
Software Installation
For peak performance, the recommended computer hardware components are:
• Pentium or better processor
• 32 MB RAM
• 500 MB or larger hard drive
• Video card and monitor capable of 256 color display at 800 x 600 pixels or better
Software requires Windows® XP® or later.
The program is written to display real-time plotting of load and deflection during the test, to
perform calculations of stiffness values and the log slope of the creep curve at selected loading
times, and to display the results and test parameters at the end of each test.
The installation program will copy the BBRw executable file and other necessary files to the directory
specified by the operator.
To verify correct installation of the BBRw software, follow the procedure below and the Windows®
process to install and start the BBRw program.
Installation Procedure
1. Turn on your computer and place the installation disk in your CD disc drive.
2. Follow the Windows
prompts to complete the installation.
Contact Service at CANNON with any VISCPRO installation issues.
To Next Page
Loading...