Cannon TE-BBR - TE-BBR Specifications

CANNON Instrument Company | Specifications
7
Specifications
Table 1: CANNON TE-BBR Specifications
Specifications
Details
Model
CANNON TE-BBR Thermoelectric Bending Beam Rheometer
Methodology
ASTM D6648, AASHTO T313, SHRP Binder Provisions
Applications
Low temperature flexural creep testing of asphalt binders
Dimensions
(W × D × H)
Control Unit: 73.7 cm × 70.1 cm × 55.9 cm
(29 in × 28 in × 22 in)
Load Frame: 58.4 cm × 48.3 cm × 68.6 cm
(23 in × 19 in × 27 in)
Air/Water Heat Exchanger: 49.5 cm × 40.6 cm × 48.3 cm
(19.5 in × 16 in × 19 in)
*add 15 cm ( 6 in) to front and rear dimensions for
connection and air flow allowance
Weight
Control Unit: 49.9 kg (110 lb)
Load Frame: 15.9 kg (35 lb)
Air/Water Heat Exchanger: 68 kg (150 lb)
Maximum Throughput
6 results per hour
Sample Capacity
1
Flexural Creep Stiffness
Range
20 mPa to 1 GPa
Sample Supports
Specimen support strips 3 mm ± 0.30 mm in top radius
Bath Volume
5 L (1.33 gal)
Temperature Range
ambient to -40 °C (± 0.03 °C stability; ± 0.01 °C resolution)
Sample Dimensions
12.7 mm x 6.35 mm x 127 mm (o.5 in x 0.25 in x 5 in)
Data Output
RS 232