CANNON Instrument Company | Troubleshooting
programming is required, the necessary procedures, including a description of the use of the
Download button located on the right rear panel of the TE-BBR, are provided.
Note: If the download button is pressed inadvertantly when the BBR is in
operation, the TE-BBR instrument and software will need to be powered off and
restarted.
Clean the Instrument Housing
Caution: Turn off all power and unplug the power cord before cleaning the BBR.
Periodically clean the outside of the TE-BBR units with a damp cloth moistened with water and/or a
mild detergent solution. Do not wipe or otherwise apply pressure to the base of the load shaft in
order to avoid damaging the load cell.
To Next Page
Loading...