CANNON Instrument Company | Unpack and Install the TE-BBR
Unpack and Install the TE-BBR
Caution: Some components, including the Control Unit and the Air/Water Heat
Exchanger, are quite heavy. Avoid injury by obtaining assistance when lifting and
moving the instrument and its components.
The TE-BBR is a sensitive device. Take care when handling and using the
instrument to avoid accidental damage to a high precision component.
Check the shipping container(s) for external damage before opening and carefully inspect the
contents after opening for evidence of damage.
Report any damage to the shipper and to Cannon Instrument Company immediately.
Take special care when unpacking the Load Frame. Foam blocks and other restraints have been used
to prevent damage to the measurement system. These must be removed with care to prevent
undue stress on these components.
CANNON advises users to retain the packing material and original shipping container for the Load
Frame in the event that it is necessary to return the Load Unit to Cannon
Instrument Company for
service.
Ensure that all of the contents of each container are retained. All auxiliary items shipped with the TE-
BBR are labeled. When all containers have been opened, compare the contents with the packing slip
to ensure that there are no missing items.
To Next Page
Loading...