TE-BBR Instruction and Operation Manual
Appendix 1 – Test Reports
ASCII File Format for TE-BBR Report Files (.csv)
(quotes indicate constant strings)
“Project”, Project ID
“Operator”, Operator ID
“Specimen”, Specimen ID
“Timestamp”, Test Date and Time
“Target Temperature (C)”, Test Temperature
“Soak Time (minutes)”, Time in Bath
“Beam Span (mm)”, 101.6
“Beam Width (mm)”, Width Measurement
“Beam Thickness (mm)”, Thickness Measurement
“Time (s)”,”Force (mN)”,”Deflection (mm)”,”Temperature (C)”
0.0, Force at 0.0 s, Deflection at 0.0 s, Temperature at 0.0 s
0.5, Force at 0.5 s, Deflection at 0.5 s, Temperature at 0.5 s
249.5, Force at 249.5 s, Deflection at 249.5 s, Temperature at 249.5 s
To Next Page
Loading...