CANNON Instrument Company | Ordering Information
Ordering Information
The CANNON TE-BBR Thermoelectric Bending Beam Rheometer consists of the bending beam
rheometer with load frame, air/water heat exchanger, a complete precision calibration kit, a set of
six aluminum molds with Mylar separators and data storage/management software. Computer sold
separately. Refer to Table 2 and Table 3 for assistance ordering desired components.
Table 2: TE-BBR Part numbers
Table 3: TE-BBR Accessories and Consumables
BBR precision calibration kit (D6648 update): rugged carrying case
containing a high precision gage block, precision-cut stainless steel thin
beam and NIST-traceable calibration certificates
Complete BBR precision calibration kit: rugged carrying case containing
a high precision gage block, precision cut stainless steel thin beam, ¼”
compliance beam, four 100 gram weights and NIST-traceable
calibration certificates.
Silicone rubber mold for BBR; simplifies the procedure for making
asphalt beams
Aluminum mold for BBR: standard mold kit
Aluminum molds (6) for BBR: standard mold kit
To Next Page
Loading...