CHAPTER 2 BASIC OPERATION
2-44
COPYRIGHT © 1999 CANON INC. CANON DADF-B1 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Note:
1. Response to a Jam
The ADF is stopped immediately in response to any of the jams in Table 2-207.
2. Resetting after a Jam
For a pickup delay jam, remove the originals from the original tray to reset the ADF. For other
types of jams, remove the originals from the original tray and from inside the ADF; then, open
and close the ADF to reset.
3. An alarm indication will turn on when either of the following is executed:
· mixed size operation without selecting mixed size mode
· copying stapled originals
If the original must be removed from inside the machine, both jam and alarm indications will be
turned on.
For example, the "Alarm and 8C Jam" indications may be turned on at the same time. The
alarm indication will remain for 5 sec after removal of the jam and, thereafter, the alarm will
automatically turn off.
To Next Page
Loading...
