Canon DADF-B1 - Specifications; II. Specifications

CHAPTER 1 GENERAL DESCRIPITON
1-2
COPYRIGHT © 1999 CANON INC. CANON DADF-B1 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
II. SPECIFICATIONS
Item Specifications
Pickup method Automatic pickup/delivery
Type of original Original tray: double-sided sheet (52 to 105 g/m2); see Note 1.
Copyboard glass: book (50 mm thick max.)
Size of original A3 (279 mm x 431.8 mm; 11"x17") to A5 (STMT)
Length: 140 to 432 mm (feeding direction)
Width: 140 to 297 (305) mm
Note: The values in parentheses indicate when the guide lock is released.
Orientation of original Face up
1st page at top
Placement of original Center reference
Original separation Separation pad (top separation)
Original processing
mode
Single-sided original processing (small-size, large-size), double-sided original
processing
Height of stack
(80 g/m
2
paper)
30 sheets (small size; A4, B5, A5, STMT, LTR)
15 sheets (large-size; A3, 279x431.8 mm/11"x17", B4, LGL)
Mixing sizes Possible (of the same width)
Size identification Yes (feeding direction + default width)
Residual original
detection
Yes (by LED)
2-on-1 function No (by copier's memory)
Stamp No
Last original detection 690 msec or less
Communication with
copier
IPC 2
Power supply 24 VDC (from copier)
Serial numbers ZSB xxxxx AB
ZSC xxxxx INCH/A
ZSD xxxxx A
ZSE xxxxx AB/INCH
Maximum power
supply
160 W or less at peak; 39 W in average
Operating environment
temperature/humidity
range
Same as copier
Dimensions 583 (W) x 506 (D) x 179 (H) mm
Weight 12.8 kg (approx.)
Table 1-201