Condensation may form
in
the following
case,s:
When the camcorder
is
moved from
an
When the camcorder is moved from a
air-conditioned room
to
a warm, humid cold place to a warm room
place
When the camcorder
is
left in a humid
room
When a cold room
is
heated rapidly
74
How to avoid condensation:
o Do not expose the camcorder to sudden or extreme changes
in
temperature.
o Unload the disc, place the camcorder
in
an airtight plastic bag and let it adjust
to
temperature changes slowly before removing it from the bag.
When condensation is detected:
o The camcorder automatically shuts off. If a disc
is
loaded, remove the disc immediately
and leave the disc cover open. Leaving the disc
in
the camcorder may damage
it.
o A disc cannot be loaded when condensation is detected.
Resuming use:
o The precise time required for water droplets to evaporate will vary depending
on
the
location and weather conditions. As a general criterion, wait for 2 hours before
resuming use
of
the camcorder.
U.$i.og
...
tb..eiii.CiamiCiO.r.d~.ri.AbiriQiadii"
Power Sources
You
can
use the compact power adapter
to
operate the camcorder and to charge battery
packs
in
any country with power supply between 100 and 240 V AC, 50/60
Hz.
Consult
the Canon Service Center for information
on
plug adapters for overseas use.
Playback on a TV Screen
You
can only play back your recordings
on
TVs compatible with the NTSC system. The
NTSC system
is
used
in
the following countries/areas:
American Samoa, Antigua, Aruba, Bahamas, Barbados, Bermuda, Bolivia, Canada,
Chile, Colombia, Costa Rica, Cuba, Ecuador,
EI
Salvador, Guam, Guatemala, Greenland,
Haiti, Honduras, Jamaica, Japan, Korea, Mexico, Micronesia, Myanmar, Nicaragua,
Panama, Peru, Philippines, Puerto Rico, Saint Kitts and Nevis, Saint Lucia, Saint Vincent
and the Grenadines, Surinam, Taiwan, Trinidad and Tobago, USA, Venezuela, Virgin
Islands.
To Next Page
Loading...
