Canon imagePRESS Lite C170 - Page 114

Canon imagePRESS Lite C170 Series Service Guide
imagePRESS Lite C170 Series Service Guide March 2022
Revision 11 Page 106
Table 66 – Booklet Finisher AC1 and Staple Finisher-AC1 Specifications
Continued
Item
Specifications
Saddle Stitch/Fold
(Booklet Finisher-AC1
Only)
Saddle Stitch (including 1 cover sheet up to 95 lb cover (256 g/m
2
))
• 20 sheets (14 lb bond to 21.7 lb bond (52 g/m
2
to 81.4 g/m
2
))
• 10 sheets (21.8 lb bond to 28 lb bond (82 g/m
2
to 105 g/m
2
))
• 5 sheets (29 lb bond to 40 lb bond (106 g/m
2
to 150 g/m
2
))
• 4 sheets (56 lb cover to 77 lb cover (151 g/m
2
to 209 g/m
2
))
• 3 sheets (78 lb cover to 81 lb cover (210 g/m
2
to 220 g/m
2
))
Saddle Folding
3 sheets (14 lb bond to 28 lb bond (52 g/m² to 105 g/m²))
Paper Weight
14 lb bond to 140 lb index (52 g/m
2
to 256 g/m
2
).
(For content pages, you can use paper with a basis weight of 14 lb
bond to 81 lb cover (52 g/m2 to 220 g/m2)).
Size
12" x 18", 11" x 17", LGL, LTRR and Custom Size (7 3/4" x 10 5/8" to
12" x 18" (195.0 mm x 270.0 mm to 304.8 mm x 457.2 mm))
Note: The maximum saddle stitching capacity may vary, depending on
the paper type and weight.
Power Source/Maximum
Power Consumption
From the main unit
Dimensions (W x L x H)
Approximately 20 3/4" x 24 1/2" x 43 1/4"
(527 mm x 623 mm x 1,099 mm)
When the auxiliary tray and rotation tray are extended
Approximately 25 7/8" x 24 1/2" x 47 1/8"
(56 mm x 623 mm x 1,195 mm)
Weight
Staple Finisher-AC1
Approximately 79.4 lb (36 kg)
Booklet Finisher-AC1
Approximately 132 lb (60 kg)
Installation Space
Including the Main Unit
(W x L)
(When the Document
Insertion / Folding Unit-K1
and POD Deck Lite-C1 are
attached, and the auxiliary
tray and rotation tray are
extended)
Staple Finisher-AC1
Approximately 85 3/4" x 36 3/4"
(2,179 mm x 934 mm)
Booklet Finisher-AC1
Approximately 93 3/4" x 37 1/8"
(2,381 mm x 941 mm)