Canon imagePROGRAF iPF6300S User Manual

Messages regarding ink
Ink insufficient. .............................................................................................................................................. 1062
No ink left. ...................................................................................................................................................... 1062
Remaining level of the ink cannot be correctly detected. .............................................................................. 1062
Close Ink Tank Cover ................................................................................................................................... 1063
Not much ink is left. ....................................................................................................................................... 1063
No ink tank loaded. ....................................................................................................................................... 1063
Wrong ink tank. .............................................................................................................................................. 1064
Ink insufficient.
Cause Corrective Action
The ink level is low, so you cannot print, clean the Printhead, or do other op-
erations that require ink.
Press ▲ or ▼ to select Rep. Ink
Tank, and then press the OK button.
Replace the Ink Tank that is low with
a new Ink Tank.
(See "Replacing Ink Tanks.")
→P.972
Press ▲ or ▼ to select Continue to
print, and then press the OK button to
resume printing. However, note that
this error may affect the printing quali-
ty.
Press the OK button and replace the
Ink Tank that is low with a new Ink
Tank.
(See "Replacing Ink Tanks.")
→P.972
No ink left.
Cause Corrective Action
There is no ink left. Open the Ink Tank Cover and replace the Ink Tank for which the Ink Lamp is flashing.
(See "Replacing Ink Tanks.") →P.972
Remaining level of the ink cannot be correctly detected.
Cause
Corrective Action
Ink level detection cannot work cor-
rectly if you use refill ink tanks.
The refill ink tank can no longer be used. See the section Ink level detection
and take the appropriate action. (See "Ink Level Detection.") →P.1045
Error Message > Messages regarding ink >
Ink insufficient. iPF6300S
13
1062

Canon imagePROGRAF iPF6300S Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S
Category	Printer
Language	English