Canon imagePROGRAF iPF6300S - Changing the Object Size; Selecting an Object

Selecting an Object
When an object is selected, a select box (blue border) appears around the object.
Note
• To select an object, click that object.
• To select multiple successive objects, click them while holding down the shift key.
• To select multiple arbitrary objects, click them while holding down the command key.
• To select all objects, select Select All from the Edit menu.
Changing the Object Size
You can change the object size by means of mouse operation or by specifying a scaling value.
Note
• The vertical-to-horizontal ratio remains unchanged when the object is enlarged or reduced.
Resizing by means of mouse operation
1. Select an object.
Mac OS X Software
> Free Layout >
iPF6300S Selecting an Object
4
575