Canon imagePROGRAF iPF6300S - Removing Rolls from the Roll Holder

8. Close the Roll Feed Unit Cover.
Note
• To load new paper in the printer at this point, see "Loading Rolls in the Printer." →P.784
Removing Rolls From the Roll Holder
1. Remove the Holder Stopper from the Roll Holder.
2. Remove the roll from the Roll Holder.
3. Remove any attachments as follows.
• 3-Inch Paper Core Attachment
Handling Paper
> Handling rolls >
Removing Rolls From the Roll Holder iPF6300S
6
792