Canon imagePROGRAF iPF6300S - Network Environment

Network Environment
Network Environment ...................................................................................................................................... 935
Network Environment
System requirements
The system requirements, which vary depending on your network, are as follows.
•
Printing over a TCP/IP network (when using IPv4)
• Compatible operating systems
• Windows XP (Home Edition or Professional)
• Windows Server 2003 (Standard Edition)
• Windows Vista (Home Basic/Business/Ultimate)
• Windows Server 2008 (Standard Edition or Enterprise Edition)
• Windows 7
• Windows XP Professional x64 Edition
• Windows Server 2003 x64 Edition
• Windows Vista x64
• Windows Server 2008 x64
• Windows 7 x64
• Mac OS X 10.2.8 or later
• Unix (Solaris 9)
• Unix (Red Hat 9)
• Compatible computer
• A computer that runs one of the above operating systems
•
Printing over a TCP/IP network (when using IPv6)
• Compatible operating systems
• Windows Vista (Home Basic/Business/Ultimate)
• Windows Server 2008 (Standard Edition or Enterprise Edition)
• Windows 7
• Windows Vista x64
• Windows Server 2008 x64
• Windows 7 x64
• Mac OS X 10.3.9 or later
Note
• When using IPv6, you must specify IPv6 on the Control Panel or in RemoteUI. For instructions, see
"Configuring TCP/IPv6 Network Settings." →P.944 or see "Configuring the Printer's TCP/IP Net-
work Settings With RemoteUI ." →P.946
• The imagePROGRAF printer driver is supported in Mac OS X 10.4.11 or later.
• The imagePROGRAF printer driver is not compatible with Unix.
Network Setting > Network Environment >
iPF6300S Network Environment
10
935