Canon imagePROGRAF iPF6300S - Removing Sheets

7. Remove the sheet, keeping the front edge level as you pull it out.
Important
• If POP Board is accidentally removed at an angle, it may scratch the printed surface.
8. Press the OK button.
9. Lift the four Front Tray Guides above the Ejection Guide, store them toward the front, and then press the OK button.
Removing Sheets
Remove sheets from the printer as follows.
• Removing sheets from the top paper feed slot →P.818
• Removing heavyweight sheets from the front paper feed slot →P.818
Handling Paper
> Handling sheets >
iPF6300S Removing Sheets
6
817