When you select By entering values directly in Setting Method
•
A Setting Method
You can choose configuration based on the printed Chart or based on using the i1 colorimeter.
•
B Lighting Source Type
Select the light source measured using the i1 colorimeter.
•
D Color Temperature
Enter the Color Temperature measured using the i1 colorimeter.
•
E Illuminance
Enter the Illuminance measured using the i1 colorimeter.
Displayed when the A Matching Method is set to Monitor Matching on the Matching sheet.
Note
• For details on settings items, see "Adjusting the Color in the Printer Driver →P.55 "
Windows Software
>
Printer Driver
>
Ambient Light Adjust dialog box iPF6300S
3
228
To Next Page
Loading...
