Important
• To configure network settings, you must be logged in with administrative rights such as Administrator ac-
count. We recommend that your network administrator configure the network settings.
Note
• For instructions on installing imagePROGRAF Device Setup Utility, see "Installing imagePROGRAF De-
vice Setup Utility." →P.442
When specifying an IPv4 IP address
1. Start imagePROGRAF Device Setup Utility from the start menu.
2. In the Device Name list displayed, select the printer to configure.
3. Choose Protocol Settings from the Printer menu.
Windows Software
>
Device Setup Utility
>
iPF6300S Configuring the IP Address Using imagePROGRAF Device Setup Utility
3
443
To Next Page
Loading...
