3. Press ▲ or ▼ to select the type of paper, and then press the OK button.
When printing on heavyweight paper, select POP Board and load the sheet in the Front Paper Feed Slot. (See
"Loading Heavyweight Sheets in the Front Paper Feed Slot .")
→P.812
When printing on other types of paper, select the type of paper and load the sheet in the Top Paper Feed Slot. (See
"Loading Sheets in the Top Paper Feed Slot .") →P.810
Note
• For details on types of paper to select, see the Paper Reference Guide. (See "Types of Paper.")
→P.773
Loading Sheets in the Top Paper Feed Slot
Important
• One sheet of paper can be loaded at a time. Do not load multiple sheets. This may cause paper jams.
• Before feeding paper or printing, make sure the sheet is flat against the Paper Tray Cover. The sheet may jam
if it curls before feeding or printing and the trailing edge drops toward the front.
• Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.
• Load the paper straight. Loading paper askew will cause an error.
Note
• Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
1. Open the Paper Tray Cover (a), and then open the Tray Extension (b).
Handling Paper
>
Handling sheets
>
Loading Sheets in the Feed Slot iPF6300S
6
810
To Next Page
Loading...
