Canon imagePROGRAF iPF6300S User Manual

Setting Item Description, Instructions
System
Setup
Reset PaprSetngs Restores settings that you have changed with Media
Configuration Tool to the default values.
Erase
HDD
Data
High Speed Erases file management data for print job data stored
on the printer's hard disk. (See "Erasing Data on the
Printer's Hard Disk.") →P.886
Secure High Spd. Overwrites the entire hard disk with random data.
(See "Erasing Data on the Printer's Hard Disk.")
→P.886
Secure Overwrites the entire hard disk with 00, FF, and ran-
dom data (one time each). Verification is performed to
check if the data was correctly written. (See "Erasing
Data on the Printer's Hard Disk.") →P.886
Output
Meth-
od
Print Select the printing method for jobs received from soft-
ware other than the printer driver. When using the
printer driver, configure settings on the printer.
To print as usual, select Print. Selecting Print (Auto
Del) will print the job and then delete the data from
the printer's hard disk. Selecting Save: Box 01 will
only save the print job in the box, without printing it.
Print (Auto Del)
Save: Box XX
Print After Recv A setting for jobs received from software other than
the printer driver. When using the printer driver, con-
figure settings on the printer. Select On to print the
job after it has been saved.
Common Box Set. Select Print (Auto Del) to print without saving jobs
in the box shared among multiple users.
Show Job Log Selecting Off prevents display of the log in Job
Menu > Job Log. Additionally, the log is not printed
if you choose Job Menu > Print Job Log. Note that
because job logs are not collected, the Status Monitor
accounting functions will not work correctly.
Prep.MovePrinter When transferring the printer to another location,
choose the level of transfer and follow the instructions
on the screen. (See "Preparing to Transfer the Print-
er.") →P.1003
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
Admin.
Menu
Change Password By setting a password, you can restrict menu display
and configuration as follows. Enter a number in the
range 0–9999999.
• Viewing and configuration by administrators
only
IPv4 Settings
Change Password
Init.Admin.Pswd
• Viewing and configuration by
administrators, and only viewing by other
users
Interface Setup settings (except IPv4 Settings )
Date & Time
Control Panel
> Printer Menu >
iPF6300S Menu Settings
9
923

Canon imagePROGRAF iPF6300S Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S
Category	Printer
Language	English