2. In Print Server Name, enter the name of the print server created in "Specifying NetWare Print Serv-
ices →P.955 ."
3. In Print Server Password, enter the password of the print server created in "Specifying NetWare Print
Services →P.955 ."
4. In Polling Interval, specify the interval at which the printer checks the NetWare print queue.
• If you have selected RPrinter: Remote Printer Mode (Using a Bindery Print Server)
1. In Print Server Name, enter the advertising name of the print server created in "Specifying NetWare
Print Services →P.955 ."
2. In Printer Number, enter the same printer number specified in "Specifying NetWare Print Serv-
ices →P.955 ."
• If you have selected NDS PServer: Queue Server Mode (Using an NDS Print Server)
1. In Tree Name and Context Name, enter the tree and context name of the print server.
2. In Print Server Name, enter the name of the print server created in "Specifying NetWare Print Serv-
ices →P.955 ."
3. In Print Server Password, enter the password of the print server created in "Specifying NetWare Print
Services →P.955 ."
4. In Polling Interval, specify the interval at which the printer checks the NetWare print queue.
• If you have selected NPrinter: Remote Printer Mode (Using a NDS Print Server)
1. In Print Server Name, enter the advertising name of the print server created in "Specifying NetWare
Print Services →P.955 ." Usually, the advertising name is the same as the name of the print server.
2. In Printer Number, enter the same printer number specified in "Specifying NetWare Print Serv-
ices
→P.955 ."
8. Click OK to display the Network page.
Network Setting
>
NetWare Settings
>
iPF6300S Configuring the Printer's NetWare Network Settings With RemoteUI
10
959
To Next Page
Loading...
