Chapter 7
7-12
Detail information display 1
F-7-2
Detail information display 2
F-7-3
Detail information display 3
F-7-4
Detail information display 4
F-7-5
8) INK CHECK
Displays the number of times the remaining ink level detection function was turned off, to accommodate refilled ink cartridges in the order of PC, C, MBK, Y, M,
PM, R, G, B, PGY, GY and BK.
0: Never
1: Executed at least once
Display Description LCD display contents
1 Jam type 1:Carriage error, 2:Jam, 3:Feed failure (delay), 4:Cut failure, *:Unknown
2 Media 1:Roll media, 2:Cut sheet (manual feed from top), 3:Cut sheet (manual feed from front), 4:Cassette, *:Unknown
3 Jam timing 1:Feed, 2:Print, 3:Eject, *:Unknown
4 Media width detection 1:ON, 2:OFF, *:Unknown
5 Head height 0:SL (1.2mm), 1:L (1.4mm), 2:M1 (1.8mm), 3:M2 (2.0mm), 4:M3 (2.2mm), 5:H (2.6mm), *:Unknown
6 (Not Used) -
7 Cut mode setting 1:User cut, 2:Eject cut, 3:Auto cut, *:Unknown
8 Environment Display Media Information Tool's environment settings A to F according to Temperature/Humidity Detection Sensor
0: A, 1:B, 2:C, 3:D, 4:E, 5:F, *:Unknown
9 Borderless printing setting 1:Bordered printing, 2:Borderless printing, *:Unknown
10 (Not Used) -
11 Print mode Display print mode, *:Unknown
12 Media width Display media width, *:Unknown
13 Media name Display media name, *:Unknown
1: XXXXXXXXX
JAM 01
123456789
X
10
2: XXXXXXXXX
JAM 01
11
3: XXXX
JAM 01
12
4:
JAM 01
13
XXXXXXXX
To Next Page
Loading...
Need help?
General
