Chapter 1
1-45
1.7.2.3 Handling the Printer
0012-6294
1. Precautions against Static Electricity
Certain clothing may generate static electricity, causing an electrical charge to build up on your body. Such a charge can damage electrical devices or change their
electrical characteristics.
In particular, never touch the printhead contacts[1].
F-1-44
2. Fixing the Carriage
After completion of printing, the carriage is mechanically locked by the lock arm in the purge unit at the same moment the printhead is capped.
Before transporting the printer, secure the carriage at its home position using belt stopper[1] so that the carriage does not become separated from the lock arm and
damage or ink does not leak.
F-1-45
[1]
[1]
To Next Page
Loading...
Need help?
General
