Canon imagePROGRAF iPF8400 Service Manual

Chapter 1
1-18
2. Main Menu
The structure and settings of the main menu is as follows. The asterisk mark "*" is default setting.
[Paper Menu]
T-1-1
First Level Second Level Third Level Fourth Level Fifth Level
[Load Paper] [Roll Paper]
[Cut Sheet]
[Eject Paper]
[Chg. Paper Type] [Roll Paper] (The paper type is displayed
here.)
[Cut Sheet] (The paper type is displayed
here.)
[Chg. Paper Size] [Sheet Size]*2 (The paper type is displayed
here.)
[CustomPaperSize] (Set the paper length and
width.)
[Roll Length]*1 (Set the paper length.)
[Roll Width]*2 (Set the paper width.)
[ManageRemainRoll] [Off]*
[On]
[Paper Details] (The paper type is displayed
here.)
[Head Height] [Automatic]*
[Highest]
[High]
[Standard]
[Low]
[Lowest]
[Super Low]
[Skew Check Lv.] [Standard]*
[Loose]
[Off]
[Cutting Mode] [Automatic]
[Eject]
[Manual]
[Cut Speed] [Fast]
[Standard]
[Slow]
[Trim Edge First] [Automatic]
[Off]
[On (Preset Len)]
[On(Input Length)]
[Manual]
[CutDustReduct.] [Off]
[On]
[VacuumStrngth] [Automatic]*
[Strongest]
[Strong]
[Standard]
[Weak]
[Weakest]
[Roll Tension] [High]
[Standard]

Canon imagePROGRAF iPF8400 Specifications

General

Internal storage capacity	250 GB