Canon LBP3360 - USER MAIN. Options

6-6
Printing Environment Settings
6
Setting Items
An asterisk (*) indicates the default setting.
*1 May not be displayed depending on the settings for other items.
■ USER MAIN. Options
An asterisk (*) indicates the default setting.
*1 May not be displayed depending on the availability of the optional accessories and other settings.
START WAIT TIME 0 to 300 seconds; 0 seconds* p. 6-28
REMOTE UI SET.
REMOTE UI:
ON*, OFF
p. 6-29
ETHERNET DRIVER
AUTO DETECT:
ON*, OFF
COMM.MODE*
1
:
HALF DUPLEX*, FULL DUPLEX
ETHERNET TYPE*
1
:
10 BASE-T*, 100 BASE-TX
MAC ADDRESS:
(Display only)
p. 6-29
INIT.N/W SET. - p. 6-29
CONNECT.RECOG. ON*, OFF p. 6-29
Item Setting Value
Applicable
Page
ADJ.START POS.
OFFSET Y(SLOT): -5.0 to 5.0; 0.0* (mm)
OFFSET X(SLOT): -5.0 to 5.0; 0.0* (mm)
OFFSET Y(CASS1): -5.0 to 5.0; 0.0* (mm)
OFFSET X(CASS1): -5.0 to 5.0; 0.0* (mm)
OFFSET Y(CASS2)*
1
: -5.0 to 5.0; 0.0* (mm)
OFFSET X(CASS2)*
1
: -5.0 to 5.0; 0.0* (mm)
OFFSET Y(DUP.): -5.0 to 5.0; 0.0* (mm)
OFFSET X(DUP.): -5.0 to 5.0; 0.0* (mm)
p. 6-30
RECVRY PRINTING ON*, OFF p. 6-30
SPECIAL MODE J OFF*, ON p. 6-31
SUBSTITUTE SIZE OFF*, ON p. 6-31